Painting with spray paint is quick and easy. Check out the step by step to renew the painting of a metal fruit bowl. More info can be found at http://www.duraspraycoatings.ie/.
Using a spray coating can renew the decor of the entire house, including decorative objects. Let’s repeat the painting of a metal fruit bowl, and then you can see how easy and quick it is.
Check out our step by step and all the crucial tips for you to change the decoration of this type of piece, making your home even more beautiful and colourful.
You will need:
- Sandpaper for iron in 100;
- Fast First Use General Colouring;
- Paint spray Colorgin Synthetic enamel or Colorgin Metallic Exterior;
- Wet cloth;
Preparation For Painting
The first thing to do is sanding the entire surface to be painted. After this, it is necessary to remove the powder with the help of a damp cloth. Let it dry.
Line the surface where you will do the painting with canvas. If possible, look for an open, windless place. Such care is vital so that the paint does not paint other objects or surfaces that are nearby. Remove bracelets, rings and watches.
How To Apply Primer
The next step is to use the introduction so that the surface is protected against rust and to ensure better adhesion to the paint that will be utilized later.
The first thing to do is to homogenize the product thoroughly. To do this, hold the spray can with one hand and make rotating (and not up and down) movements for three minutes;
Put on the gloves and the mask. The glove will keep your hands clean, and the cover protects you from the smell of the product;
The primer should be applied at a distance of approximately 25 centimetres from the surface of the object. In the first coat, give small sprinkles and apply a thin layer to prevent ink from flowing. In the second coat, you can already cover with more paint. The time between coats can be only two minutes.
How to Apply Spray Paint
Now it is the turn of the colour, which will renew the look of the fruit bowl and also of your kitchen.
Hold the spray can work with one hand and rotate (not up and down) for three minutes to homogenize the paint.
Follow the same application orientation as the primer, with a thinner coat and a rough coat. Generally, two layers are enough to cover the surface well, but if you find it necessary, apply the third coat. Wait to dry.
For the paint and spray primer to be used again at the end of the job, turn each tube upside down and press the nozzle until only the gas comes out. This eliminates the accumulated paint and prevents clogging of the valve, allowing you to use the product to the end.