Underfloor Insulation in the Finest Settings

Under tough floors it is recommended on the screed to put foil material. They can be izolon. This is thin, but creates a fairly high level of reflection from the heat coming from the room.

All proposed types of floor insulation are recommended for residences. The proposed material is environmentally friendly and does not endanger health. Guided by gradual work instructions, and observing all the rules of joint c stitching, floor insulation on the first floor will be done correctly.

To warm the floor at home on the ground floor is a mandatory task. This may not be the only solution to achieve complete comfort at home and often only represents the stage of a series of actions to provide heat. This is about weathering walls, ceilings, entrance groups and window openings. But the most logical thing is to start treating heat insulation from the floor. This article will discuss the floor insulation overlapping the first floor. With the Green Horizon Under floor Insulation you can expect the best results now.

Ground floor device

To begin, it is a good idea to determine which type of material is most widely used for surface heating. The most popular at the moment are:

  • foam plastic
  • polystyrene foam
  • dry screed of expanded clay
  • glass wool
  • mineral (stone) wool

They differ not only in cost, but also in a number of characteristics that are worth considering in more detail. Because some of the proposed materials have the same or mistaken origin for analogs, comparative characteristics will help make choices.

Insulation for the first floor

Polystyrene or polystyrene foam

If we talk about kinship, then these are the two heaters, of course. Polyfoam is a little older, expanded polystyrene seems to be a better version.

The difference starts at the production stage. The raw material used is polystyrene granules. To get foam, they are treated with a stream of hot air, and they are, developed, connected forming products with porous structures. The extrusion method is more progressive, and as a result of its use, the granules from the starting material melt. The output is a material with a single structure, denser than the specimen described above. At the same time, cellular structures, which contribute to heat retention, are stored in them.

Polystyrene foam is stronger than “sibling” in bending 5-6 times and it will not collapse if environmental conditions change. In addition, the expanded polystyrene absorbs moisture even worse, and thanks to the improved density indicator, it absorbs noise much more effectively.

Glass wool or mineral wool

Another challenge is the choice between glass wool and mineral wool.

Both of these materials are lightweight and non-toxic (depending on the use of high-quality building products from proven brands). But they are not subject to decay and to them mold is not formed. Refractory indicators are both for products and others. It is wise to use polyfoam to warm floors in rooms where small permeability is assumed, and the surface will not experience the added burden of, for example, solid furniture. This will be suitable for those who want to save. However, as follows from the above technical characteristics Such desires are not always appropriate.

Leave a Reply

Your email address will not be published. Required fields are marked *